CP 601S Elastomeric Firestop Sealant
A silicone based firestop sealant that provides maximum movement in fire-rated joint applications and pipe penetrations.
Categories: Fire-Resistive Joints (Wall / Floor / Curtain Wall), Non-Intumescent Sealants
Get the Flash Player to see this rotator.
Get the Flash Player to see this rotator.
Get the Flash Player to see this rotator.
Products :: Penetration Firestopping
- Blocks / Pillows (5)
- Boards (6)
- Cable Coatings (2)
- Collars (Combustible pipe penetrations) (5)
- Devices (e.g. Cast-in-place, sleeves) (11)
- Duct Wrap (3)
- Intumescent Sealants (10)
- Intumescent Wrap Strips (9)
- Membrane Penetration Protection (7)
- Non-Intumescent Sealants (23)
- Plugs (1)
CP 604 Self-Leveling Firestop Sealant
Self-leveling, single-component, silicone-based firestop sealant for use with through-penetrations as well as construction joints in floors.
Categories: Fire-Resistive Joints (Wall / Floor / Curtain Wall), Non-Intumescent Sealants
CP 606 Flexible Firestop Sealant
An acrylic based firestop sealant that provides movement capability in fire rated joints and seals through penetrations applications.
Categories: Fire-Resistive Joints (Wall / Floor / Curtain Wall), Non-Intumescent Sealants
CP 617 Putty Pads
A moldable firestop putty designed to help protect electrical outlet boxes.
Categories: Membrane Penetration Protection
CP 618 Putty Sticks
An intumescent, non-hardening, firestop putty for cable and pipe penetrations.
Categories: Non-Intumescent Sealants
CP 619T Putty Roll
An intumescent, non-curling putty roll used in conjunction with Fire Block and Firestop Board.
Categories: Intumescent Sealants
CP 620 Fire Foam
Innovative firestopping solution for complex applications with up to 6 times expansion and cures within 60 seconds.
Categories: Intumescent Sealants
CP 637 Firestop Mortar
Fire-resistant mortar suitable for firestopping large openings.
Categories: Non-Intumescent Sealants
CP 643N Firestop Collars
A ready-to-use firestop collar, made of a galvanized steel housing and intumescent inserts for firestopping combustible pipes.
Categories: Collars (Combustible pipe penetrations)
CP 644 Firestop Collars
A ready-to-use firestop collar, made of a galvanized steel housing and intumescent inserts for firestopping large combustible pipes.
Categories: Collars (Combustible pipe penetrations)
CP 648-E Wrap Strip
An intumescent, flexible firestop wrap strip for plastic and insulated pipe penetrations.
Categories: Intumescent Wrap Strips
CP 648-S Wrap Strip
A single wrap of intumescent, flexible firestop wrap strip for use with plastic and insulated pipe penetrations.
Categories: Intumescent Wrap Strips
CP 653 Speed Sleeve
The Hilti CP 653 Speed Sleeve is a ready-to-use, one-step cable management firestop device. The Hilti CP 653 Speed Sleeve provides fast product installation, ease of cable penetration and re-penetration, superior ability to limit smoke migration whether empty or 100% visual fill, a wide portfolio of firestop details, and a robust, lightweight solution that endures long-term, high-traffic usage.
Categories: Devices (e.g. Cast-in-place, sleeves)
CP 658T Firestop Plug
A ready-to-use intumescent flexible plug based on a two component polyurethane foam.
Categories: Plugs
CP 675T Firestop Board
A ready to use Firestop Board designed for large openings with cable trays and multiple penetrations.
Categories: Boards
CP 680-M Cast-In Firestop Device
A one-step cast-in firestop device for a variety of pipe materials and diameters with an integrated smoke seal for metallic penetrations.
Categories: Devices (e.g. Cast-in-place, sleeves)
CP 680-P Cast-In Firestop Device
A one-step cast-in firestop device for a variety of pipe materials and diameters with an integrated smoke seal for combustible penetrations.
Categories: Devices (e.g. Cast-in-place, sleeves)
CP 681 Tub Box Kit
An innovative tub box solution that is structurally stable, assembles easily with solvent cement, and can be pre-cut to cutomer’s hiehg requirement upon request.
Categories: Devices (e.g. Cast-in-place, sleeves)
CS Cable Spray
SpecSeal Cable Coating is a latex-based, spray-applied coating designed to protect grouped electrical cables against the propagation of fire. This material, when properly installed, will limit flame spread and provide short-term circuit integrity during a fire situation.
Categories: Cable Coatings
CS-195+ Composite Sheet
A thin one-part composite system comprised of four components, used for shielding cable trays and conduit, HVAC ductwork and vital process equipment from radiant heat, flame spread and smoke. Fire Ratings of up to 4 hours.
Categories: Boards
EP Powershield Electrical Box Inserts
SpecSeal Power Shield electrical box insert is a one-component pad for use in electrical switch or receptacle boxes. The intumescent insert has been designed to install inside the box, directly against the back wall.
Categories: Membrane Penetration Protection
Expantrol™ Flexible Intumescent Strip (E-FIS)
An intumescent tape that expands in a fire to seal doors, frames and glazing application preventing the passage of flame and smoke.
Categories: Intumescent Wrap Strips
EZ-Path
EZ-Path customers benefit from greatly enhanced cable management. The EZ-Path System allows cable installations to be easily organized by type, use, or trade… Or any other way that you might like to do it.
Categories: Devices (e.g. Cast-in-place, sleeves)
Fire Barrier 2000N/S Silicone Sealant
Premium sealant available in nonslump formula. This product is great for fire rated construction joints and may also be used for through penetrations. Accommodates vibration from normal building movement. Maximum pipe size of 24 inches (609 mm). Compression/extension recovery of + or – 31% of original joint width.
Categories: Fire-Resistive Joints (Wall / Floor / Curtain Wall), Non-Intumescent Sealants
Fire Barrier 2001 Silicone RTV Foam
A two-part, liquid-silicone elastomer that foams in place when mixed. Firestops and seals large and complex penetrations. Cures in 1-5 minutes to form an elastomeric compression seal. No ampacity derating of cables when used properly.
Categories: Non-Intumescent Sealants
Fire Barrier Cast-in Device Products
Our cast-in devices are line of intumescent devices that are installed to firestop combustible and non-combustible pipe penetrations through concrete floor assemblies.
Categories: Devices (e.g. Cast-in-place, sleeves)
Fire Barrier CP 25WB+ Water Based Caulks
Our premium, intumescent latex/water-based caulk. Water based – easy cleanup and routine disposal with no special handling. One-part system – no mixing or measuring required. Intumescent and endothermic.
Categories: Intumescent Sealants
Fire Barrier Duct Wrap 15A
A fire resistant wrap consisting of a patented inorganic blanket encapsulated with a scrim-reinforced foil. Used to fire rate commercial kitchen grease ducts.
Categories: Duct Wrap
Fire Barrier Duct Wrap 615+
3M™ Fire Barrier Duct Wrap 615+ is a fire resistant wrap consisting of an inorganic fiber blanket encapsulated with a scrim-reinforced foil. It is used to fire rate commercial kitchen grease ducts as well as ventilation ducts, and is a proven alternative to 1 or 2 hour fire resistant rated shaft enclosures.
Categories: Duct Wrap
Fire Barrier IC 15WB+ Water Based Caulks
A water based latex, intumescent smoke and firestopping sealant for wall and floor penetrations. Easy-to-handle formulation that bonds to gypsum wallboard, concrete, metals, wood, plastic and cable jacketing. Dries to a firm, rubber-like solid. Provides up to 2 hours of fire protection.
Categories: Intumescent Sealants
Fire Barrier Mortar
This lightweight cementitious firestop with excellent adhesion bonds to concrete, metals, wood, plastic and cable jacketing. Variable mix ratio – permits self-leveling and no-sag application consistencies.
Categories: Non-Intumescent Sealants
Fire Barrier Pass-Through Products
3M Fire Barrier Pass-Through Devices are a complete solution for preventing the spread of fire and smoke where electrical, data, communications cable or pipes penetrates floor or wall. The devices are designed for the high traffic areas where cable are constantly being added and removed.
Categories: Devices (e.g. Cast-in-place, sleeves)
Fire Barrier Pillows
The 3M Fire Barrier Pillows are a self-contained highly intumescent product designed to firestop a wide variety of through-penetrations including cable trays (up to two per opening), conduit and blank openings, which penetrate fire-rated construction.
Categories: Blocks / Pillows
Fire Barrier Putty Sleeve Kits DT 100, DT 200 and DT 400
3M™ Fire Barrier Putty Sleeve Kits DT 100, DT 200 and DT 400 are designed to help prevent the passage of fire and smoke in new or existing cable penetrations through walls or floors. The oversized openings can accommodate up to a one-inch larger diameter than the 3M™ Fire Barrier Putty Sleeve diameter.
Categories: Membrane Penetration Protection
Fire Barrier Self-Locking Pillows
3M Fire Barrier Self Locking Pillows are based on the design of our 3M™ Fire Barrier Pillows they provide all of the system coverage you have gotten use to plus they provide the added benefits of interlocking strips which allow them to easily be installed in floors and walls and removed quickly when new services are added.
Categories: Blocks / Pillows
Fire Barrier Silicone Sealant 2000+
A premium nonslump sealant bonds to most common construction materials to form a flexible seal. Superior Adhesion. Remains elastomeric and is weather resistant. This product is great for through penetrations and may also be used for fire rated construction joints.
Categories: Fire-Resistive Joints (Wall / Floor / Curtain Wall), Non-Intumescent Sealants
Fire Barrier Tuck-In Wrap Strips
3M™ Fire Barrier Tuck-In Wrap Strips are designed to help prevent the passage of fire and smoke in new or existing non-metallic (e.g. plastic) pipe penetrations through wall or floor assemblies. 3M™ Fire Barrier Tuck-In Wrap Strips are engineered primarily for top-side firestop installations and help eliminate the need for retaining collars, concrete screws, ladders or most other material and equipment necessary for bottom-side installations. 3M™ Fire Barrier Tuck-In Wrap Strips come ready-to-install with an adhesive-backed closure label. The wrap strips can be easily installed in both concrete floor and wall assemblies, as well as gypsum wallboard assemblies.
Categories: Intumescent Wrap Strips
Fire Barrier Water Tight Silicone Sealant 1000 NS
3M Fire Barrier Water Tight Sealant 1000 NS (nonslump) and 3M Fire Barrier Water Tight Sealant 1003 SL (self-leveling) are both ready-to-use, one component, silicone elastomers. Both cure upon exposure to atmospheric humidity to form a flexible seal.
Categories: Fire-Resistive Joints (Wall / Floor / Curtain Wall), Non-Intumescent Sealants
Fire Barrier Water Tight Silicone Sealant 1003 SL
3M Fire Barrier Water Tight Sealant 1000 NS (nonslump) and 3M Fire Barrier Water Tight Sealant 1003 SL (self-leveling) are both ready-to-use, one component, silicone elastomers. Both cure upon exposure to atmospheric humidity to form a flexible seal.
Categories: Fire-Resistive Joints (Wall / Floor / Curtain Wall), Non-Intumescent Sealants
Fire Barrier Water Tight Silicone Sealant 3000 WT
3M Fire Barrier Water Tight Sealant 3000 WT is a premium , ready-to-use, single component, neutral cure, non-slumping, intumescent silicone sealant. The sealant cures upon exposure to atmospheric humidity to form a flexible seal.
Categories: Fire-Resistive Joints (Wall / Floor / Curtain Wall), Non-Intumescent Sealants
FireDam 150+ Acrylic Latex Caulks
Acrylic Latex caulk used to firestop metal pipes and cables through concrete or gypsum and for use in dynamic head-of-wall systems.
Categories: Non-Intumescent Sealants
FS 657 Fire Blocks
Ready-to-use, intumescent flexible blocks based on a two-component polyurethane foam.
Categories: Blocks / Pillows
FS-195+ Wrap/Strip
One-part, intumescent elastomeric strip with foil on one side. Documented aging properties. Can be cut to fit irregular shapes. Up to 4 hours of Fire Protection.
Categories: Intumescent Wrap Strips
FS-ONE High Performance Intumescent Firestop Sealant
Intumescent Firestop Sealant that Helps Protect Combustible and Non-Combustible Penetrations for Up to a 4 Hour Fire Rating.
Categories: Intumescent Sealants
FyreFlange Firestop Angle
FyreFlange Firestop Angle with its built-in firestop gasket, installs as the duct is installed and provides a completely mechanical firestopping solution.
Categories: Boards
Grease Duct Access Doors
The 3M Fire Barrier Grease Duct Access Door is the only tested and listed (OPL) door that has been fire tested in conjunction with 3M Fire Barrier Duct Wrap products.
Categories: Duct Wrap
Interam Intumescent Mats
Intumescent firestop mat used in firestopping of construction joints and cable tray fire breaks. Available with or without aluminum or stainless steel foil backing.
Categories: Boards
LCC Intumescent Collars
LCC Collars represent BIG performance in an incredibly small package. LCC utilizes the latest in fast and aggressive intumescent technology.
Categories: Collars (Combustible pipe penetrations)
LCI Intumescent Sealant
LCI Intumescent Sealant has been tested and approved for a wide variety of common applications including metallic, nonmetallic, and insulated pipes as well as all common data, communication, and television cabling.
Categories: Intumescent Sealants
Metacaulk 1000
Metacaulk® 1000 is a water based, single-component, general purpose, fire-rated sealant for through-penetrations on both vertical and horizontal surfaces, as well as construction joints.
Categories: Fire-Resistive Joints (Wall / Floor / Curtain Wall), Non-Intumescent Sealants
Metacaulk 1200
Metacaulk 1200 is a water-based firestop sealant that comes in three different grades. A spray application of Metacaulk 1200 provides a fast, economical means of installation for long joint runs. Self Leveling is made for horizontal applications and caulk grade is a non-sag sealant that is easy to apply. Metacaulk 1200 is also an excellent, fire-rated acoustical sealant. It cures to an elastomeric membrane seal suitable for use where dynamic movement is expected.
Categories: Fire-Resistive Joints (Wall / Floor / Curtain Wall), Non-Intumescent Sealants, Sprays
Metacaulk 350i
Metacaulk 350i is a one component, general purpose fire rated sealant and smoke seal for construction joints and through-penetrations.
Categories: Fire-Resistive Joints (Wall / Floor / Curtain Wall), Non-Intumescent Sealants
Metacaulk 835+
Metacaulk 835+ is a silicone based sealant designed for use on PVC pipe – closed (pressure systems), EMT, insulated and uninsulated steel pipe, glass pipe, construction and control joints and interior expansion joints.
Categories: Non-Intumescent Sealants
Metacaulk 950
Metacaulk 950 is a water based sealant designed for use on metal pipe including steel, EMT, copper, aluminum and glass pipe as well as telephone and power cables. Can also be used with PVC, CPVC and polybutylene (PB) plastic pipe on closed (pressure) systems.
Categories: Non-Intumescent Sealants
Metacaulk Box Guard
Metacaulk Box Guard is a one component fire rated pad for use in electrical boxes. It is inserted on the inside back wall of an electrical box and is a highly intumescent firestop material. Saves labor costs.
Categories: Membrane Penetration Protection
Metacaulk Cast-In-Place
Metacaulk Cast-In-Place Firestop Devices are designed for use in poured concrete floors to form a through penetration firestop system.
Categories: Devices (e.g. Cast-in-place, sleeves)
Metacaulk Composite Sheet
Metacaulk Composite Sheet is a rigid fire resistive panel used to seal penetrations and restore the fire rating to floor/ceilings or walls in which a large opening has been made for the passage of penetrating items.
Categories: Boards
Metacaulk Cover Guard
Metacaulk Cover Guard is a single component fire rated gasket for use with electrical boxes when addressing the “24 inch rule”. Metacaulk Cover Guard is applied by hand, does not take up volume in the electrical box and is a labor saving replacement for putty pads in normal applications.
Categories: Membrane Penetration Protection
Metacaulk Fire Rated Mortar
Metacaulk Fire Rated Mortar is a load bearing mortar formulated to economically firestop large openings for through-penetrations in fire rated walls and floors.
Categories: Non-Intumescent Sealants
Metacaulk Firestop Pillows
Metacaulk Firestop Pillows are intumescent and designed for use primarily in large openings with cables, cable trays, blank openings or multiple penetrating items.
Categories: Blocks / Pillows
Metacaulk Industrial Cable Coating
Metacaulk Industrial Cable Coating is a heavy duty, acrylic latex based intumescent coating used to prevent flame spread on power and communication cables. Industrial Cable coating is designed to resist the spread of fire along the cable jacketing and to extend the circuit integrity of the electrical cables during a fire.
Categories: Cable Coatings
Metacaulk MC 150+
Metacaulk MC 150+ is a one component, general purpose fire-rated sealant and smoke seal for construction joints and through-penetrations. It prevents the spread of flames, smoke, and gas through penetration openings.
Categories: Fire-Resistive Joints (Wall / Floor / Curtain Wall), Non-Intumescent Sealants
Metacaulk Pipe Collar
Metacaulk Pipe Collars are prefabricated for through-penetration firestop systems using PVC, CPVC, ABS, PVC foam core, ABS foam core, FRPP, PEX pipe and electrical cable.
Categories: Collars (Combustible pipe penetrations)
Metacaulk Putty Pads
Metacaulk Putty Pads are used to maintain the hourly rating of fire rated walls containing electrical outlet boxes and to reduce sound transmission.
Categories: Membrane Penetration Protection
Metacaulk Putty Sticks
Metacaulk Putty Sticks are used to seal around penetrating items through fire rated walls, floors and within blank openings. For use with electrical cables, conduit and metal pipes. Hand moldable with no curing time required. Will not dry out and can be re-used as additional penetrating items are removed or installed.
Categories: Non-Intumescent Sealants
Metacaulk Wrap Strip
Metacaulk Wrap Strip is a flexible strip of highly intumescent firestop material used primarily for plastic and insulated pipe applications. When exposed to heat, this product expands and forms a hard char to seal off the penetration by preventing the passage of flames and hot gases.
Categories: Intumescent Wrap Strips
Moldable Putty+ Pads
3M Fire Barrier Moldable Putty+ is a one-part, halogen-free product designed to firestop electrical outlet boxes and a wide variety of through-penetrations including cable, conduit, insulated pipe and metal pipe, which penetrate fire-rated construction.
Categories: Membrane Penetration Protection
Pen200 Two-Part Silicone Foam
Pensil 200 Firestop Foam (PEN200) is a two-component RTV silicone foam that features excellent crack-and-void filling capabilities. Unlike other foams, PEN200 exhibits uniform cell structure, assuring reproducible, smoke-tight, fire resistant installations.
Categories: Intumescent Sealants
Pen300 Silicone Joint Sealant
Pensil 300 Silicone Sealant is a one-part neutral curing silicone sealant exhibiting superior performance in applications where sealing apertures in walls and floors are needed to control the spread of fire, smoke, toxic gasses, and water during fire conditions.
Categories: Fire-Resistive Joints (Wall / Floor / Curtain Wall), Non-Intumescent Sealants
Ready Sleeve Kits
Larger sizes of the Ready Sleeve include a built in bushing that protects cable jacketing and allows for easy cable pulling. One-piece escutcheon plates secure the sleeve within the wall. Ready Sleeve is the only product of its type that includes external firestopping as required by code. SpecSeal Firestop putty is included to complete the installation.
Categories: Devices (e.g. Cast-in-place, sleeves)
Ready Split Sleeve Kits
Ready Split Sleeves are designed with a split pathway and wall plates that allow it to be assembled around existing cable bundles.
Categories: Devices (e.g. Cast-in-place, sleeves)
SpecSeal Composite Sheet
Sheet firestopping materials have long been the choice for large openings where a neat appearance or completely sealed exterior surface was required. The SpecSeal Composite Sheet is lighter, stronger, and easier to fabricate than traditional materials while offering improved fire protection.
Categories: Boards
SSB Firestop Pillows
Unlike other products that incorporate intumescent sheets or coatings on just the top and bottom surfaces, our Firestop Pillows are coated on all sides meaning faster and more aggressive expansion.
Categories: Blocks / Pillows
SSC Intumescent Collars
No other product reacts faster to cut off the path for fire propagation than SpecSeal SSC Intumescent Firestop Collars.
Categories: Collars (Combustible pipe penetrations)
SSM Firestop Mortar
SpecSeal Firestop Mortar is an economical, light-weight portland cement-based firestop product.
Categories: Non-Intumescent Sealants
SSP Intumescent Putty
When firestopping cables that require retrofitting, SpecSeal SSP Putty is the product of choice. Available as a 36 cubic inch bar, SSP Putty is the perfect choice for new construction or maintenance applications.
Categories: Intumescent Sealants
SSS Latex Intumescent Sealant
Triple S reacts to heat using our patented and proprietary two-stage intumescent technology to expand rapidly to close off the path of smoke and hot gasses ahead of the advancing fire.
Categories: Intumescent Sealants
SSWBLU Intumescent Wrap Strip
If your project takes you beyond stock PVC and ABS piping and into the tougher-to-protect plastics like PP, FRPP, and PVDF… Then you need the unmatched power and protection of SpecSeal BLU Wrap Strip!
Categories: Intumescent Wrap Strips
SSWRED Intumescent Wrap Strip
RED Wrap Strip not only handles the difficult plastics, it also handles flammable pipe insulations or anything else that requires a lot of intumescent expansion in a hurry. RED Wrap Strip saves money by requiring up to a 50% less wrap strip in common plastic pipe applications.
Categories: Intumescent Wrap Strips
T-Collar
The new Fire Trak T-Collar is specially designed to lower the temperature of a penetrant in such an event, making it compliant with the T-ratings of many construction codes.
Categories: Devices (e.g. Cast-in-place, sleeves)
Ultra GS
Intumescent and endothermic Ultra GS wrap/strip roll. No waste – roll out and cut as much material as you need from the 40-foot (12 m) roll. Works with most non-metallic and metallic insulated pipes.
Categories: Intumescent Wrap Strips
WF300 Intumescent Firestop Caulk
Type WF300 Caulk is a latex based, high solids firestop caulk. This material, when properly installed, effectively seals penetration openings in wood frame construction against the spread of fire, smoke and combustion byproducts.
Categories: Intumescent Sealants
